- Kill Manifold
- 2017-12-27 02:18
- Kill Manifold 1.ApplicationIn case of increase of the well head pressure, thekill manifoldcan provide a means of pumping heavy drilling fluid into the well to balance bottom hole pressure so than well kick and blowout can be prevented. In this case, by us
- RTTS Safety Joint
- 2017-12-14 20:20
- RTTS Safety Joint RTTS Safety Jointis a king of security tool. When a packer is stuck, you can use RTTS safety joint to help raise pipe string above the safety joint and make this safety joint disengaged, exerting a pulling force to the pipe string and pu
- Taper Tap
- 2017-12-02 14:54
- Taper Tap The Taper Tap is especially used for tapping and fishing the fallen substances in the hole from the inner hole,likeoil tubing ,drill pipe ,washover pipe ,packer , and accessories. It has high fishing rate for those fallen pipes with the coupling
- Extension Rod
- 2017-11-16 18:25
- Extension Rod: The extension rod is one of the important accessories ismud pumppower end, and fustions in delivering motive power to hydraulic end. Material for the intermediate draw bar is 35CrMo, Its surface is chrome-faced, after polishing, its wear-re
- Fishing Magnet
- 2017-10-27 09:51
- Fishing Magnet The GAOTON S-Fishing Magnet is ajunk retrieval tooldesigned to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these
- Sucker Rod (Polished Rod, Pony Rod, Sucker Rod Coupling, Steel Sucker Rod, Sub Coupling, Hollow rod,
- 2017-10-19 06:14
- Sucker Rod The Sucker Rod is a slender rod, it is connected with the polished rod and well pump, and play the role of power transmission. Grade: C, D, K, KD, HL, HY and KH.Products range:Sucker Rod and Pony Rod Sucker Rod Coupling Polished Rod Super-high
- Junk Mill
- 2017-10-15 23:35
- Junk MillMilling toolis a kind of tool for milling the fishes. Such asbits , cone, cutter gauge, slip elements, swivel wash pipes,subs , parts of deep-well pump, etc.The flat bottom and concave junk mill milling the fishes with the effect of drilling pres
- Casing Slips
- 2017-10-09 17:14
- Casing Slips Casing Slips can accommodate casing from41/2inch to 30 inch (114.3-762mm)O.D.Technical Parameter If you have any further requirements, please feel free to contact us by [email protected]
- Liner Hanger
- 2017-09-25 08:53
- Liner HangerLiner hangeris mainly through the hydraulic transmission to achieve the Liner Hanger, which is widely used in the technology of oil and gas well and geothermal well. Features 1.Suitable for casing sidetracking drilling, deepening and workover
- Valve Assembly
- 2017-09-24 02:21
- Valve assembly:Valve Bodyvalve seatare die-forged by supplier alloy steel, using advanced mechanical technology and heat treatment method to get high degree, dimensional accuracy, high strength and toughness, the surface hardness not less than HRC60. The
- Choke Manifold ( Throttle Manifold )
- 2017-09-10 04:51
- Choke Manifold 1.ApplicationChoke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling, as it is, the device is adopted to execute new drilling-well’s tech
- Christmas Tree ( X-mas tree )
- 2017-08-19 18:16
- Christmas Tree Gaonton company could provide HH classwellheadandoilgas Christmas Tree ,fracture wellheadand oilgas Christmas Tress, electric pump wellhead and oil x-mas tree, compact and integrated wellhead and oil x-mas tree etc. It is applicable to offs
- Washover Pipe
- 2017-08-18 22:23
- Washover PipeWashover pipeis a special tool to release the stuck section ofdrillstringin the well bore. GAOTON offers a complete range ofwashover pipein the industry. GAOTON unique FJWP thread is a two-step double shoulder thread which assure quick make u
